The following charts indicate the standard trimming and installation instructions for all of the TWGT designed shafts. These charts simply indicate the normal trimming and installation procedures for each shaft and may be altered by the clubmaker for custom shaft fitting and installation purposes for each golfer.
Clubmakers please note that the standard shaft trimming and installation guidelines in the 2010 catalog are set up for all the new S2S shaft designs. In addition shaft trimming for certain TWGT shafts which have not been re-designed for 2010 may have been changed based on further shaft fitting research by TWGT.
Shaft Trimming for Woods
| Trim Chart A |
| Clubhead |
Std. Tip Trim |
Butt Trim |
| 1w |
0" |
To Length |
| 3w |
1" |
To Length |
| 4w |
1 1/2" |
To Length |
| 5w |
2" |
To Length |
| 7w |
2 1/2" |
To Length |
| 9w |
3" |
To Length |
| 11w |
3" |
To Length |
Trim Chart A is for the following Wood Shafts:
S2S White: R, S flexes
S2S Gold Plus High: R, S flexes
S2S Gold Tour Flight: R, S, X flexes
S2S Black 65: R, S flexes
S2S Black 85: R, S flexes
S2S Blue 45: A flex
S2S Blue 55: R, S flexes
|
| Trim Chart B |
| Clubhead |
Std. Tip Trim |
Butt Trim |
| 1w |
0" |
To Length |
| 3w |
3/4" |
To Length |
| 4w |
1 1/8" |
To Length |
| 5w |
1 1/2" |
To Length |
| 7w |
1 3/4" |
To Length |
| 9w |
2" |
To Length |
| 11w |
2" |
To Length |
Trim Chart B is for the following
Wood Shafts:
S2S White: A flex
S2S Gold Plus High: A flex
S2S Blue 45: AA flex
S2S Ruby Lite: A, AA flexes
S2S Series 5-SL Flexible: L flex (add 1" for 5-SL A Flex)
Note 1: If the golfer being fit with any of the above shafts has a
strong transition/tempo. Use Trim Chart A
Note 2: Use 5w tip trim for 730CL long fairway;
use 9w tip trim for 730CL high fairway
|
VARIATIONS:
Increasing each Tip Trim by 1/2” will result in a slightly firmer feel but with no real change in launch angle. Increasing each Tip Trim by 1” will result in a more
noticeable feel in shaft firmness and will also generate a slight decrease in the launch angle.
Decreasing each Tip Trim by 1/2” will result in a slightly more flexible feel in the fairway woods with no real increase in launch angle. Decreasing each Tip Trim by
1” will result in a more noticeable increase in shaft flexibility feel but with only a very
slight increase in the launch angle.
Shaft Trimming for Iron, Hybrid and Wedge Shafts
Note: High Flight and Knock Down Steel Wedge Shafts are butt trim only shafts.
|
| Trim Chart C |
| Clubhead |
Std. Tip Trim |
Butt Trim |
| 2-iron |
0" |
To Length |
| 3-iron |
0" |
To Length |
| 4-iron |
1/2" |
To Length |
| 5-iron |
1" |
To Length |
| 6-iron |
1 1/2" |
To Length |
| 7-iron |
2" |
To Length |
| 8-iron |
2 1/2" |
To Length |
| 9-iron |
3" |
To Length |
| PW/48 |
3 1/2" |
To Length |
| AW/52 |
3 1/2" |
To Length |
| SW/56 |
4" |
To Length |
| LW/60 |
4" |
To Length |
Trim Chart C is for the following
Iron Shafts:
S2S White: R, S flexes
S2S Gold Plus High: S flex
S2S Gold Tour Flight: S flex
S2S Black 85: S flex
S2S Series 5 LW Steel: S flex
S2S Series 5 SuperLite Steel: S flex
|
| Trim Chart D |
| Clubhead |
Std. Tip Trim |
Butt Trim |
| 2-iron |
0" |
To Length |
| 3-iron |
0" |
To Length |
| 4-iron |
3/8" |
To Length |
| 5-iron |
3/4" |
To Length |
| 6-iron |
1 1/8" |
To Length |
| 7-iron |
1 1/2" |
To Length |
| 8-iron |
1 7/8" |
To Length |
| 9-iron |
2 1/4" |
To Length |
| PW/48 |
2 5/8" |
To Length |
| AW/52 |
2 5/8" |
To Length |
| SW/56 |
3" |
To Length |
| LW/60 |
3" |
To Length |
Trim Chart D is for the following
Iron Shafts:
S2S White: A flex
S2S Gold Plus High: R flex
S2S Gold Tour Flight: R Flex
S2S Gold 85: R flex
S2S Series 5 LW Steel: R flex
S2S Series 5 SuperLite Steel: R flex
S2S Series 5-SL Flexible: L flex (add 1" for 5-SL A Flex)
|
| Trim Chart E |
| Clubhead |
Std. Tip Trim |
Butt Trim |
| 2-Hybrid/Iron |
0" |
To Length |
| 3-Hybrid/Iron |
1/2" |
To Length |
| 4-Hybrid/Iron |
1" |
To Length |
| 5-Hybrid/Iron |
1 1/2" |
To Length |
| 6-Hybrid/Iron |
2" |
To Length |
| 6/7 Hybrid |
2" |
To Length |
| 8/9 Hybrid |
2 1/2" |
To Length |
Trim Chart E is for the following HYBRID Shafts:
S2S White Hybrid: AA, A, R, S flexes
S2S Gold Tour Hybrid: R, S flexes
S2S Ruby Lite: A, AA flexes
Note: S2S Ruby Lite Wedge Shaft - 0" tip for AA flex,
1" tip for A flex, Butt Trim to Length
|
TWGT 730CL Assembly & Ruby Lite Shaft Trimming
| Trim Chart |
| Clubhead |
A Flex Tip Trim |
AA (L) Flex Tip Trim |
Butt Trim |
| Driver |
0" |
0" |
To Length |
| Long Fairway |
1 1/2" |
1 1/2" |
To Length |
| High Fairway |
2" |
2" |
To Length |
| 5 Hybrid Iron |
1 1/2" |
1 1/2" |
To Length |
| 6/7 Hybrid Iron |
2" |
2" |
To Length |
| 8/9 Hybrid Iron |
2 1/2" |
2 1/2" |
To Length |
| 5-Iron |
1 1/2" |
1 1/2" |
To Length |
| 6/7-Iron |
2" |
2" |
To Length |
| 8/9-Iron |
2 1/2" |
2 1/2" |
To Length |
| PW |
1" |
0" |
To Length |
| DW |
1" |
0" |
To Length |
| |
| Length Chart |
| Clubhead |
Men |
Women |
| Driver |
43"- 44" |
42" - 43" |
| Long Fairway |
41 1/2"- 42 1/2" |
40 1/2" - 41 1/2" |
| High Fairway |
40" - 41" |
39 1/2" - 40" |
| 5 Hybrid Iron |
37 1/2" - 38" |
36 1/2" - 37" |
| 6/7 Hybrid Iron |
36 1/2" - 37" |
35 1/2" - 36" |
| 8/9 Hybrid Iron |
35 1/2" - 36" |
34 1/2" - 35" |
| 5-Iron |
37 1/2" - 38" |
36 1/2" - 37" |
| 6/7-Iron |
36 1/2" - 37" |
35 1/2" - 36" |
| 8/9-Iron |
35 1/2" - 36" |
34 1/2" - 35" |
| PW |
35" - 35 1/2" |
34" - 34 1/2" |
| DW |
34 1/2" - 35" |
33 1/2" - 34" |
Note:The reason we offer a length range for the 730CL assembly is to correspond to golfers who may play better with a shorter or slightly longer length as dictated by their playing ability. In all cases of building the 730CL clubs to the shorter of the length within the range for length, more weight will have to be added to the heads in the form of the weight plugs in the weight bore or through the use of a shaft tip weight.
